|
|
|
|
Ian A. Frigaard
Published work
|
|
|
|
Journal articles
|
|
|
|
[83]
|
S.M.
Taghavi, I.A. Frigaard, “Estimation of mixing
volumes in buoyant miscible displacement flows along near-horizontal
pipes.” Can. J. Chem. Eng., accepted for publication, to appear 2012.
|
|
|
|
[82]
|
M.
Moyers-Gonzalez, K. Alba, S.M. Taghavi, I.A.
Frigaard, “Fluid-fluid displacement flows in pipes: development of a
semi-analytical closure for stratified interfaces.” J. non-Newt. Fluid
Mech., accepted for publication, to appear 2012.
|
|
|
|
[81]
|
S.M.
Taghavi, K. Alba, I.A. Frigaard, “Buoyant
miscible displacement flows at moderate viscosity ratios and low Atwood
numbers in near-horizontal ducts.” Chem. Eng. Sci., 69(1), pp. 404-418,
(2012).
|
|
|
|
[80]
|
S.M.
Taghavi, K. Alba, T. Seon, K. Wielage-Burchard,
D.M. Martinez, I.A. Frigaard, “Miscible displacement flows in
near-horizontal ducts at low Atwood number.” J. Fluid Mech.,
doi:10.1017/jfm.2012.26, (2012).
|
|
|
|
[79]
|
S. Hormozi and
I.A. Frigaard, “Nonlinear stability of a visco-plastically lubricated viscoelastic fluid flow.” J. non-Newt. Fluid Mech., 169–170, pp. 61-73, (2012).
|
|
|
|
[78]
|
A. Madani, D.M. Martinez, J.A. Olson, I.A. Frigaard,
“The stability of spiral Poiseuille flows of
Newtonian and Bingham fluids in an annular gap.” J. non-Newt. Fluid Mech., doi.org/10.1016/j.jnnfm.2012.02.007, (2012).
|
|
|
|
[77]
|
S.M. Taghavi, K. Alba, M. Moyers-Gonzalez, I.A. Frigaard, “Incomplete fluid–fluid displacement of
yield stress fluids in near-horizontal pipes: Experiments and theory.” J. non-Newt. Fluid Mech., 167–168, pp. 59-74, (2012).
|
|
|
|
[76]
|
S. Hormozi, D.M.
Martinez, I.A. Frigaard, “Stable
core-annular flows of viscoelastic fluids using the visco-plastic
lubrication technique.” J.
non-Newt. Fluid Mech., 166
(23–24), pp. 1356-1368 (2011).
|
|
|
|
[75]
|
S.M.
Taghavi, T. Seon, D.M. Martinez, K. Wielage-Burchard and I.A.
Frigaard, “Stationary
residual layers in buoyant Newtonian displacement flows.” Phys.
Fluid., 23, 044105 (2011).
|
|
|
|
[74]
|
T. Burghelea and
I.A. Frigaard, “Unstable parallel flows triggered by a fast chemical
reaction.” J. non-Newt. Fluid Mech., 166,
(9-10), pp. 500-514 (2011)
|
|
|
|
[73]
|
K. Wielage-Burchard and I.A. Frigaard, “Static wall layers in plane channel
displacement flows.” J. non-Newt. Fluid Mech., 166 (5-6), pp.
245-261 (2011).
|
|
|
|
[72]
|
K. Pougatch and
I.A. Frigaard, “Thin film flow on
the inside surface of a horizontally rotating cylinder: steady state
solutions and their stability.” Phys. Fluids., 23, 022102 (2011)
|
|
|
|
[71]
|
S. Hormozi, K. Wielage-Burchard and I.A. Frigaard, “Entry, start up
and stability effects in visco-plastically
lubricated pipe flows.” J. Fluid Mech., 166 (5-6), pp. 262-278 (2011).
|
|
|
|
[70]
|
N. Dubash, I.A. Frigaard and Boris Stoeber, “An
oscillatory flow phenomenon in microtube flows of
thermally responsive fluids”, J. Engng. Math., DOI: 10.1007/s10665-010-9404-x
|
|
|
|
[69]
|
S. Hormozi, K. Wielage-Burchard and I.A. Frigaard, “Multi-layer
channel flows with yield stress fluids.” J. non-Newt. Fluid Mech. 166, (5-6), pp. 262-278 (2011)
|
|
|
|
[68]
|
M.
Moyers-Gonzalez, I.A. Frigaard and C. Nouar, “Stable two-layer flows at all Re; visco-plastic
lubrication of shear-thinning and viscoelastic fluids.”
J. non-Newt. Fluid Mech., 165, (23-24), pp.
1578-1587, (2010).
|
|
|
|
[67]
|
A.
Guha and I.A. Frigaard, “On the stability of plane Couette-Poiseuille
flow with uniform crossflow.” J. Fluid Mech.,
656, pp. 417-447 (2010).
|
|
|
|
[66]
|
S.M. Taghavi, T.
Seon, D.M. Martinez and I.A. Frigaard,
“Influence of an imposed flow on the stability of a gravity current in a
near horizontal duct.” Phys. Fluid., 22, 031702, (2010).
|
|
|
|
[65]
|
S.
Malekmohammadi, M.F. Naccache, I.A. Frigaard and
D.M. Martinez, “Buoyancy driven slump flows of non-Newtonian fluids in
pipes.” J. of Petr. Sci. Engng., 72(3-4), PP.
236-243, (2010).
|
|
|
|
[64]
|
M.
Carrasco-Teja and I.A. Frigaard, “Non-Newtonian fluid displacements in
horizontal narrow eccentric annuli: Effects of motion of the inner
cylinder.” J. Fluid Mech., 653, pp. 137-173 (2010).
|
|
|
|
[63]
|
A.
Madani, S. Storey, J.A. Olson, I.A. Frigaard, J. Salmela
and D.M. Martinez, “Fractionation of rod-like particle suspensions in a viscoplastic fluid.” Chem. Eng. Sci. 65(5), pp.
1762-1772 (2010)
|
|
|
|
[62]
|
M.
Moyers-Gonzalez and I.A. Frigaard, “Critical wall velocity for
stabilization of plane Couette-Poiseuille flow of
viscoelastic fluids.” J. non-Newt. Fluid Mech., 165, (7-8), pp.
441-447, (2010).
|
|
|
|
[61]
|
A.
Putz and I.A. Frigaard, “Creeping flow around
particles in a Bingham fluid” J. non-Newt. Fluid Mech., 165(5-6), pp. 263-280
(2009).
|
|
|
|
[60]
|
C.
Nouar and I. Frigaard, “Stability of plane Couette–Poiseuille flow of
shear-thinning fluid.” Phys. Fluids 21 064104 (2009).
|
|
|
|
[59]
|
S.
Malekmohammadi, M. Carrasco-Teja, S. Storey, I.A.
Frigaard and D.M. Martinez, “An experimental study of displacement flow
phenomena in narrow vertical eccentric annuli.” J. Fluid Mech.,
649, pp. 371-398 (2010).
|
|
|
|
[58]
|
I.A.
Frigaard & G.A. Ngwa, “Slumping flows in
annuli: design of chemical packers & cementing of subsurface pipes.”
Invited paper, Trans. Por. Media, doi:10.1007/s11242-009-9467-1,
(2009).
|
|
|
|
[57]
|
S.M.
Taghavi, T. Seon, D.M. Martinez and I.A.
Frigaard, “Buoyancy-dominated displacement flows in near-horizontal
channels: the viscous limit.” J. Fluid Mech., 639, pp. 1-35,
(2009).
|
|
|
|
[56]
|
A.
Putz, I. Frigaard & D.M. Martinez, “The
lubrication paradox & use of regularisation methods for lubrication
flows.” J. non-Newt. Fluid Mech., 163(1-3), pp. 62-77, (2009)
|
|
|
|
[55]
|
C.
Nouar and I. Frigaard, “Stability of plane Couette–Poiseuille flow of shear-thinning fluid.” Phys.
Fluids 21 064104 (2009).
|
|
|
|
[54]
|
M. Moyers-Gonzalez and
I.A. Frigaard, “Kinematic
instabilities in two-layer eccentric annular flows, part
2: shear thinning and yield stress effects, J. of Engng. Math.,
65(1), pp. 25-52, (2009)
|
|
|
|
[53]
|
B.
Güzel, I.
Frigaard, D.M. Martinez “Predicting
laminar–turbulent transition in Poiseuille pipe
flow for non-Newtonian fluids”, Chem. Eng. Sci. 64(2), pp. 254-264, (2009).
|
|
|
|
[52]
|
M.
Carrasco-Teja and I.A. Frigaard, “Displacement flows in horizontal, narrow,
eccentric annuli with a moving inner cylinder.” Phys. Fluids, 21 073102 (2009).
|
|
|
|
[51]
|
B. Guzel, T. Burghelea, I. A. Frigaard and D. M.
Martinez,
“Observation of laminar-turbulent transition of yield stress fluid in
Hagen-Poiseuille flow”, J. Fluid Mech., 627, pp. 97- 128 (2009).
|
|
|
|
[50]
|
A.
Wachs, G. Vinay & I. Frigaard, “1.5D model for start up of weakly compressible viscoplastic
and thixotropic fluid in pipelines”, J. non-Newt. Fluid Mech., 159(1-3), pp. 81-94, (2009).
|
|
|
|
[49]
|
C. Metivier, I.A. Frigaard and C. Nouar,
“Non-linear stability of the Bingham Rayleigh-Benard
flow”, J. non-Newtonian Fluid Mech., 158(1-3), pp. 127-131, (2009).
|
|
|
|
[48]
|
M. Carrasco-Teja, I. Frigaard, B. Seymour and
S. Storey, “Visco-plastic fluid displacements in
horizontal narrow eccentric annuli” J. Fluid Mech. 605, pp. 293-327 (2008).
|
|
|
|
[47]
|
A. Putz, T.
Burghelea, D.M.
Martinez and I.A. Frigaard,
“Settling of an isolated spherical particle in a yield stress shear
thinning fluid”, Physics of Fluids, 20,
033102 (2008).
|
|
|
|
[46]
|
M. Moyers-Gonzalez and
I.A. Frigaard, “Kinematic
instabilities in two-layer eccentric annular flows, part 1: Newtonian
fluids”, J. of Engng. Math., 62(2), pp. 103-131, (2008).
|
|
|
|
[45]
|
I. Frigaard, G. Vinay and A. Wachs “Compressible
displacements flows of waxy crude oils in long pipeline startup
flows”, J. non-Newtonian Fluid Mech., 147, (1-2), pp.
45-64 (2007).
|
|
|
|
[44]
|
T. Burghelea, K. Wielage-Burchard,
I. Frigaard, D.M. Martinez and J, Feng. “A novel low inertia shear flow
instability triggered by a chemical reaction” Phys. Fluids, 19, 083102 (2007).
|
|
|
|
[43]
|
M.A. Moyers-Gonzalez, I.A. Frigaard, O.
Scherzer & T.-P. Tsai, “Transient effects in oilfield cementing flows,
part 1: qualitative behaviour”, Euro. Jnl. Appl.
Math. 18, pp. 477-512, (2007)
|
|
|
|
[42]
|
G.
Vinay, A. Wachs and I.
Frigaard, “Start-up transients and efficient computation of
isothermal waxy crude oil flows” J.
non-Newtonian Fluid Mech., 143, pp. 141-156, (2007)
|
|
|
|
[41]
|
C.K. Huen, I.A. Frigaard and D.M. Martinez,
“Experimental studies of multi-layer flows using a visco-plastic
lubricant”, J.
Non-Newtonian Fluid Mech., 142, pp. 150–161, (2007)
|
|
|
|
[40]
|
N. Dubash and I.
Frigaard, “Propagation and stopping of air bubbles in Carbopol”,
J.
Non-Newtonian Fluid Mech., 142, pp. 123–134, (2007)
|
|
|
|
[39]
|
J.Y. Zhang, I. Frigaard and D. Vola, “ Yield stress effects on Rayleigh-Benard convection” J. Fluid Mech. 566, pp. 389-419, (2006).
|
|
|
|
[38]
|
C.S. Bohun, I.
Frigaard, H. Huang & S. Liang, “A Semi-Analytical Model for InSb Crystal Growth.” SIAM J. Appl. Math., SIAM J.
Appl. Math. 66(5), pp.
1533-1562, (2006).
|
|
|
|
[37]
|
M.P. Landry,
I.A. Frigaard & D.M. Martinez, “Stability and instability of Taylor-Couette flows of a Bingham fluid” J. Fluid Mechanics, 560, pp. 321-353, (2006).
|
|
|
|
[36]
|
I.A.Frigaard
& O. Scherzer, “Herschel-Bulkley diffusion
filtering: non-Newtonian fluid mechanics in image processing” ZAMM, 86(6),
pp. 474-494, (2006).
|
|
|
|
[35]
|
J.Y. Zhang
and I.A. Frigaard, “Dispersion effects in the miscible displacement of two
fluids in a duct of large aspect ratio”, Journal of Fluid Mechanics,
549, pp. 225–251, (2006)
|
|
|
|
[34]
|
I.A. Frigaard and C. Nouar,
“On the usage of viscosity
regularisation methods for visco-plastic fluid
flow computation” J.
Non-Newtonian Fluid Mech., 127(1),
pp. 1-26, (2005).
|
|
|
|
[33]
|
G.
Lewis, I. Frigaard, H. Huang, T. Myers, R. Westbrook & M. Carrasco-Teja, “Simple models
for an injection molding system”, Can. Appl. Math. Quart.,
12(4), pp. 491, (2004).
|
|
|
|
[32]
|
I.A.
Frigaard, and D.P. Ryan,
“Flow of a visco-plastic fluid in a channel of
slowly varying width” J. Non-Newtonian Fluid Mech. 123(1), pp. 67-83, (2004).
|
|
|
|
[31]
|
N. Dubash, and I.A. Frigaard,
“Conditions for static bubbles in visco-plastic
fluids.” Physics of Fluids, 16(12),
pp. 4319-4330, (2004).
|
|
|
|
[30]
|
M. Moyers-Gonzalez, I.A. Frigaard and C. Nouar,
“Nonlinear stability of a visco-plastically
lubricated shear flow.” Journal of Fluid Mechanics, 506, pp.117-146, (2004).
|
|
|
|
[29]
|
M. Moyers-Gonzalez and I.A. Frigaard, “Numerical solution of
duct flows of multiple visco-plastic fluids” J.
Non-Newtonian Fluid Mech., 127,
pp. 227-241, (2004).
|
|
|
|
[28]
|
I.A.
Frigaard and G. Ngwa, “Upper bounds on the slump
length in plug cementing of near-horizontal wells” J. of Non-Newtonian
Fluid Mech., 117(2-3), pp.
147-162, (2004).
|
|
|
|
[27]
|
S. Pelipenko and I.A.Frigaard,
“Two-dimensional computational simulation of eccentric annular cementing
displacements.” IMA Journal of Applied Mathematics, 69: pp. 557-583, (2004).
|
|
|
|
[26]
|
S. Pelipenko and I.A.Frigaard, “Visco-plastic fluid displacements in near-vertical
eccentric annuli: lubrication modelling.” J. Fluid Mech., 520, pp.343-377, (2004).
|
|
|
|
[25]
|
I.A.
Frigaard and G. Ngwa, “Upper bounds on the slump
length in plug cementing of near-horizontal wells” J. of Non-Newtonian
Fluid Mech., 117(2-3), pp.
147-162, (2004).
|
|
|
|
[24]
|
S. Pelipenko and I.A.Frigaard,
“On steady state displacements in primary cementing of an oil well.” J. of Engng. Math., 48(1),
pp. 1-26, (2004).
|
|
|
|
[23]
|
J.
Olson, I.A. Frigaard, C. Chan
and J.P. Hämäläinen, “Modelling a
turbulent fibre suspension flowing in a planar contraction: the 1D” Int. J.
Multi-phase Flows, 30(1),
pp. 51-66, (2004).
|
|
|
|
[22]
|
I.A.
Frigaard and C. Nouar, “On three-dimensional
linear stability of Poiseuille flow of Bingham
fluids.” Physics of Fluids, 15(10),
pp. 2843-2851, (2003).
|
|
|
|
[21]
|
I.A.Frigaard, S. Leimgruber and O. Scherzer, “Variational methods and maximal residual wall
layers.” J. Fluid Mech., 483, pp. 37-65, (2003).
|
|
|
|
[20]
|
I.A.Frigaard, G. Ngwa
and O. Scherzer, “On effective stopping time selection for visco-plastic nonlinear BV diffusion filters.” SIAM J. Appl. Math., 63(6), pp. 1911-1934, (2003).
|
|
|
|
[19]
|
S.
Bittleston, J. Ferguson & I.A. Frigaard, “Mud
removal and cement placement in primary cementing of an oil well.” Invited
paper, J. Engineering Mathematics, 43,
pp. 229-253 (2002).
|
|
|
|
[18]
|
I.A.
Frigaard, M. Allouche
& C. Gabard,
“Setting rheological targets for chemical solutions in mud removal &
cement slurry design.” Journal of Petroleum Technology, 53(8), pp. 65-66 (2001).
|
|
|
|
[17]
|
C.
Nouar & I.A. Frigaard, “Nonlinear stability
of Poiseuille flow of a Bingham fluid.” J.
Non-Newtonian Fluid Mech., 100,
pp. 127-149, (2001).
|
|
|
|
[16]
|
I.A.
Frigaard, “Super-stable parallel flows of multiple visco-plastic
fluids.” J. Non-Newtonian Fluid Mech., 100, pp. 49-76, (2001).
|
|
|
|
[15]
|
I.A.
Frigaard, O. Scherzer & G. Sona, “Uniqueness & non-uniqueness in the
steady displacement of two visco-plastic fluids.”
ZAMM, 81(2), pp. 99-118,
(2001).
|
|
|
|
[14]
|
M. Allouche, I.A. Frigaard & G. Sona,
“Static wall layers in the displacement of two visco-plastic
fluids in a plane slot.”, J. Fluid Mech. 424, pp. 243-277, (2000).
|
|
|
|
[13]
|
I.A. Frigaard
& O. Scherzer, “The effects of yield stress variation on uniaxial
exchange flows of two Bingham fluids in a cylindrical duct.” SIAM J. Appl.
Math., 60(6), pp. 1950-1976,
(2000).
|
|
|
|
[12]
|
H.
Fenie & I.A. Frigaard, “Transient fluid
motions in a simplified model for oilfield plug cementing.” Mathematical
and Computer Modelling, 30(7-8),
pp. 71-91, (1999).
|
|
|
|
[11]
|
I.A.
Frigaard & J.P. Crawshaw, “Preventing
buoyancy driven flows of two Bingham fluids in a closed pipe: fluid
rheology design for oilfield plug.” J. Engng.
Math., 36(4), pp. 327-348,
(1999).
|
|
|
|
[10]
|
I.A.
Frigaard & O. Scherzer, “Uniaxial flows of two Bingham fluids in a
cylindrical duct.”
IMA
J. Appl. Math., 61, pp. 237-266,
(1998).
|
|
|
|
[9]
|
I.A.
Frigaard, “Stratified exchange flows of two Bingham fluids in an inclined
slot.”
J.
Non-Newtonian Fluid Mech., 78,
pp. 61-87, (1998).
|
|
|
|
[8]
|
I.A.
Frigaard & O. Scherzer, “Spraying the perfect billet.” SIAM J. Appl. Math., 57(3), pp. 649-682, (1997).
|
|
|
|
[7]
|
I.A.
Frigaard, “Solidification of Spray-formed Aluminium billets; heat flow in
the bulk deposit.” J. Engng. Math. 31, pp. 411-437, (1997).
|
|
|
|
[6]
|
I.A.
Frigaard, “Solidification of spray-formed Aluminium Billets; an Analysis of
Thin layering Effects.” J. Engng. Math. 30, pp. 417-443, (1996).
|
|
|
|
[5]
|
I.A.
Frigaard, “Growth dynamics of spray-formed Aluminium billets, part 2;
transient billet growth.” J. Materials Processing and Manufacturing
Science, 3(3), pp. 257-275,
(1995).
|
|
|
|
[4]
|
I.A.
Frigaard, “The dynamics of spray-formed billets.” SIAM J. Appl. Math., 55(5), pp. 1161-1203, (1995).
|
|
|
|
[3]
|
I.A.
Frigaard, “Growth dynamics of spray-formed Aluminium billets, part 1;
steady state crown shapes.” J. Materials Processing and Manufacturing
Science, 3(2), pp. 173-192,
(1994).
|
|
|
|
[2]
|
I.A.
Frigaard, S.D. Howison & I.J. Sobey, “On the stability of Poiseuille
flow of a Bingham fluid.” J. Fluid Mech., 263, pp. 133-150, (1994).
|
|
|
|
[1]
|
A.C
Fowler, I.A. Frigaard & S.D. Howison, “Temperature
Surges in Current-limiting Circuit Devices.” SIAM J. Appl. Math., 52(4), pp. 998-1011, (1992).
|
|
|
|
|
|
|
|
|
Conference articles
|
|
|
|
[23]
|
S.M. Taghavi, K. Alba, I. Frigaard
“Weakly-inertial Buoyant Displacement Flows In Near-horizontal Channels”,
in proc. 23rd Canadian Congress of
Applied Mechanics, 2011, Vancouver.
|
|
|
|
[22]
|
S. Hormozi, K. Wielage-Burchard,
and I. Frigaard “Visco-plastic Lubrication Of Flow In Channel Geometry”,
in proc. of 23rd Canadian Congress of
Applied Mechanics, 2011, Vancouver.
|
|
|
|
[21]
|
S.
Hormozi, M. Martinez, I. Frigaard and D. Grecov, “Experimental Studies of Visco-Elastic Flow Using a Visco-Plastic
Lubricant”, paper number
IMECE2010-37940,
American Society of mechanical Engineers International Congress and
Exposition, held in Vancouver, November 12-18, 2010.
|
|
|
|
[20]
|
K. Alba, S.M. Taghavi, S. Gharib, T. Seon,
M. Martinez and I. Frigaard “Displacement flow of shear
thinning fluids in tube: The effect of density and viscosity ratio”, paper number
IMECE2010-37939,
American Society of mechanical Engineers International Congress and
Exposition, held in Vancouver, November 12-18, 2010.
|
|
|
|
[19]
|
S. Hormozi, K. Wielage-Burchard, I.
Frigaard, M. Martinez and D. Grecov, “Numerical Approach to
Nonlinear Temporal Stability of Visco-Plastic
Lubrication”, paper number
IMECE2010-37930,
American Society of mechanical Engineers International Congress and
Exposition, held in Vancouver, November 12-18, 2010.
|
|
|
|
[18]
|
A. Guha and I.A.
Frigaard, “Unconditional
linear stability of plane Couette-Poiseuille flow
in presence of cross-flow”, paper number IMECE2010-37360,
American Society of mechanical Engineers International Congress and
Exposition, held in Vancouver, November 12-18, 2010.
|
|
|
|
[17]
|
K. Alba, S.M. Taghavi, S. Gharib, T. Seon,
M. Martinez and I. Frigaard “Miscible two-fluid displacement flows in a near-horizontal pipe”, proceedings Canadian Society for Mechanical Engineering, Forum,
Victoria, June 7 – 9, 2010.
|
|
|
|
[16]
|
S. Hormozi, K. Wielage-Burchard, I.
Frigaard and M. Martinez, “Entry and start-up flows in visco-plastic lubrication”, proceedings of the Canadian
Society for Mechanical Engineering, Forum, Victoria, June 7 – 9, 2010.
|
|
|
|
[15]
|
A. Guha and I.A.
Frigaard, “Stability
analysis of plane Couette-Poiseuille flow in
presence of cross-flow”, proceedings of the Canadian Society for Mechanical
Engineering, Forum, held in Victoria,
June 7 – 9, 2010.
|
|
|
|
[14]
|
G. Vinay, A. Wachs and I.
Frigaard, “Start-up of gelled waxy crude oil pipelines: a new analytical
relation to predict the restart pressure.” Soc. Petrol. Eng. paper number: SPE 122443,
(2009).
|
|
|
|
[13]
|
M. Carrasco-Teja,
I.A. Frigaard & B. Seymour, “Cementing Horizontal Wells: Complete Zonal
Isolation Without Casing Rotation” Society of Petroleum Engineers paper:
SPE 114955, (2008).
|
|
|
|
[12]
|
D.J. Guillot, J. Desroches and I.
Frigaard, “Are preflushes really contributing to
mud displacement during primary cementing?” Society of Petroleum Engineers
paper: SPE/IADC 105903, (2007).
|
|
|
|
[11]
|
C.S.
Bohun, I.A. Frigaard, H.X. Huang “A perturbation
model for the growth of type III-V compound crystals” proceedings of Conference on
Differential Equations and Asymptotic Theory in Mathematical Physics, OCT
20-29, 2003 Wuhan Univ, Wuhan, Peoples Republic China.
Appeared in Differential Equations &
Asymptotic Theory Mathematical Physics Book Series: Series In Analysis, Vol. 2 Pages: 263-279 Published: 2004
|
|
|
|
[10]
|
I.A. Frigaard and
C. Nouar, “Predicting Transition to Turbulence in
Well Construction Flows.” Society of
Petroleum Engineers paper number: SPE 81150, (2003).
|
|
|
|
[9]
|
S. Pelipenko and I.A.Frigaard, “Effective and Ineffective Strategies for
Mud Removal and Cement Slurry Design.” Society of Petroleum Engineers paper
number: SPE 80999, (2003).
|
|
|
|
[8]
|
I.A. Frigaard, M. Allouche & C. Gabard,
“Incomplete Displacement of Viscoplastic Fluids
in Slots and Pipes-Implications for Zonal Isolation.” Society of Petroleum
Engineers paper number: SPE 64998, February (2001).
|
|
|
|
[7]
|
S.W. Fosso, M. Tina, I.A. Frigaard & J.P. Crawshaw, “Viscous-pill Design Methodology leads to
Increased Cement Plugs Success Rates: Application and Case Studies from Southern Algeria.” Society of Petroleum Engineers
paper number: SPE 62752, September 2000.
|
|
|
|
[6]
|
I.A. Frigaard,
“Spray forming of large diameter billets using a twin atomiser system:
basic features of spray-form growth dynamics.” Proceedings, SDMA Conference, Bremen,
Germany,
ISBN 2-88722-473-6, Volume 2, pp. 839-853, June (2000).
|
|
|
|
[5]
|
J.P. Crawshaw & I.A. Frigaard, “Cement Plugs; Stability
and Failure by a Buoyancy-driven Mechanism.” Society of Petroleum Engineers
paper number: SPE 56959, (1999).
|
|
|
|
[4]
|
I.A. Frigaard,
N.L. Humphries, I.M. Rezmer-Cooper and J.P.
James, “High Penetration Rates: Hazards and Well Control.” Society of
Petroleum Engineers paper number: SPE 37593, (1997).
|
|
|
|
[3]
|
I.A. Frigaard,
“Controlling the Growth of Aluminium Spray-formed Billets.” in Sprayforming, eds. K. Bauckhage
and V. Uhlenwinkel, Universität
Bremen,
ISBN 3-88722-388-8, pp. 29-43, (1997).
|
|
|
|
[2]
|
I.M. Rezmer-Cooper, J. James, P. Fitzgerald, A.B. Johnson,
D.H. Davies, I.A. Frigaard, S. Cooper, Y. Luo and P. Bern, “Complex Well
Control Events Accurately Represented by an Advanced Kick Simulator.” Society of Petroleum Engineers paper
number: SPE 36829, (1996).
|
|
|
|
[1]
|
I.A. Frigaard,
“Growing Spray-formed Aluminium Billets.”
Proceedings, ECMI94 conference, ed. H. Neunzert,
Wiley/Teubner, pp. 389-396, (1996).
|
|
|
